In this virtual workshop, we will explore Sintra Board, a brand of PVC board often used for advertising and signage, that happens to work wonders in a letterpress setting. We will cover transfer methods, carving it, writing or pressing textures into its semi-soft surface, and how to use it additively with existing type or blocks. I’ll share some favorite prints from my collection that utilize this material, and we’ll cover how to print it at home by hand, or on a press in a production environment .
This class is suitable for total beginners, teachers, or printers looking to experiment with different mark making techniques for a new carving material. No press is necessary.
Date & Time:
Saturday, August 21, 2021, 10:00am – 12:00pm CDT
Online via Zoom
This workshop will be primarily demonstration based, and special supplies aren't required. You’re welcome to sit back and watch, OR if you would like to follow along, try out the material, and ask questions as we go, you will need:
• 1/8" or 1/4" thick white- or light-colored Sintra board (8”x10” or larger)
• Your preferred carving tools
• Experimental mark making tools: ball point pen, etching needle or awl, rough sandpaper, etc.
• Brayer and your favorite relief printing ink (both oil based and water based are fine)
• Paper for proofing
All levels are welcome.
What You’ll Need:
We recommend joining on a laptop, large tablet, or desktop computer with a microphone. You will receive step-by-step instructions for downloading Zoom.
Heather Moulder is a designer, printer, and musician in Nashville, Tennessee. She earned her BFA in Graphic Design at Middle Tennessee State University, and for the past 10 years she has been printing posters and making friends at Hatch Show Print. She creates her own prints, designs, and old timey tunes as Lordymercy.